Regeneration System

Regeneration is the restoration of used oil to virgin oil specifications, or even higher. Fowler Westrup regeneration systems have a reactivation feature which enables special environmental friendly media to be reused several hundred times before recharging the system with new media. Our optimized regeneration system uses dual banks of regeneration columns which provide for continuous operation of the system by regenerating oil in one bank while reactivating the media in the other bank.

Regeneration is the greenest technology offered today and It is a revolution in the oil filtration industry where the resultant savings for the user in terms of investment and oil is enormous.

Fowler Westrup carries out a through study of the client's requirement, recommends solutions, creates customized designs, implements the solution and even trains personnel to operate and maintain the systems. Most importantly, we support them fully incorporating our system seamlessly into customer's existing infrastructure.

Regeneration Cycle

Transformer or Oil tank
Heat and Pre-filter
Adsorbent media in columns
Fine filtration
Vacuum degasification and dehydration
After filter

Applications

Transformer Oil
Lubricating Oil
Hydraulic Oil
Engine Oil
Cable Oil

Features

Advanced design with superior quality
Stationary & mobile configurations
Reusable Media
Rejuvenates the life of oil and makes it an asset
Manual /fully automatic with SCADA system
Fully customizable with flow rateranging from 500 LPH to 6000 LPH & above

Benefits

Life extension of a limited resource
Economically advantageous
Extended life of expensive capital equipment
Minimal running cost
Huge savings due to media re-activation
Fully customizable
Futuristic technology for online / offline applications

Turnkey Solutions

Installation
Commissioning
Customer service
Spares
Service and maintenance schemes
Technical support network

Parameter

Unit

Used Oil

After Regeneration

Appearance

Cloudy, brown

Sparkling, clear & transparent

Colour

3.5

0.5

Breakdown Voltage

Gas Content

0.1

Interfacial Tension @27°c

N/m

0.02

0.04

Neutralisation value

mg KOH/g oil

0.5

0.03

Resistivity @27°c

ohm-cm

1.0x10¹²

1500x10¹²

Resistivity @90°c

ohm-cm

0.1x10¹²

35X10¹²

Tan delta @90°c

1.0

0.002

Water content

ppm